Step 1
MINI BEAD COLORS NEEDED (Note - starred colors can be found in the Mini Beads Large Tray):

Light Pink - 152
Bubblegum - 253
Pink* - 103
Raspberry* - 107
Cranapple* - 17
Blush* - 158
Hot Coral* - 145
Pastel Yellow* - 234
Cheddar - 5
Prickly Pear* - 186
Green* - 45
Light Green* - 54
Parrot Green* - 120
Evergreen* - 58
Turquoise - 104
Pastel Blue* - 68
Light Blue - 31
Dark Blue - 9
Blueberry Cream* - 50
Light Grey* - 14

YOU WILL ALSO NEED:
*80-17537 Mini Beads Large Tray
Mini Beads small square pegboards
Mini Beads tweezers
Iron and ironing paper
See the Supply List for beads and tools you can purchase.

Step 2
CREATING THE DESIGN:
Download the PDF for the Mini Beads Flora and Fauna Project Pattern. Slide the actual-size pattern underneath the pegboard and place your beads as shown.

Step 3
FUSING THE DESIGN: An adult should do this step.
Place your pegboard on a flat, heat-safe surface. Set a household iron to the medium setting. Place ironing paper over the pegboard. In a circular motion, begin to iron the project. When ironed properly, the beads will still have open centers. NOTE: Beads need heat for about 10 seconds per side to fuse evenly, it is possible some colors may need a little more time. Let the design cool.

Remove the paper and bead design from the pegboard. Flip the design over to expose the non-fused side. Repeat the fusing. Let cool completely. When the design is cool, peel off the ironing paper. Your pegboards and ironing paper are reusable.