Step 1
BEAD COLORS NEEDED:
Bubblegum - 27
Butterscotch - 265
Yellow - 24
Pastel Green - 24
Toothpaste - 23
Pastel Lavender - 19
Light Brown - 194
White - 551
Sky Blue Stripe - 64

YOU WILL ALSO NEED:
Large square pegboard
Iron and ironing paper
Tweezers
Quick-drying adhesive
See the Supply List for beads and tools you can purchase.

Step 2
CREATING THE DESIGN:
Download the PDF for the 3D Waffle Project Pattern. If you are using a clear pegboard, slide the actual-size pattern underneath it. Place your beads as shown.

Step 3
FUSING THE DESIGN: An adult should do this step.
Place your pegboard on a flat, heat-safe surface. Set a household iron to the medium setting. Place ironing paper over the pegboard. In a circular motion, begin to iron the project. When ironed properly, the beads will still have open centers. NOTE: Beads need heat for about 10-20 seconds per side to fuse evenly, it is possible some colors may need a little more time. Let the design cool.

Remove the paper and bead design from the pegboard. Flip the design over to expose the non-fused side. Repeat the fusing. Let cool completely. When the design is cool, peel off the ironing paper. Your pegboards and ironing paper are reusable.

Step 4
ASSEMBLY:
Assemble and glue together the layers of the project with the doily at the bottom, then the layers of the waffle with #1 at the bottom and working up to #5 at the top. Use the photo as a reference for how to overlap the layers.