Step 1
Bead Colors Needed for the Clock:
Raspberry - 26
Hot Coral - 130
Kiwi Lime - 26
Light Green - 368
Parrot Green - 192
Pastel Lavender - 26
Black - 112

Bead Colors Needed for the Mirror:
Hot Coral - 162
Orange - 72
Yellow - 78
Kiwi Lime - 72
Dark Blue - 145
Plum - 202
See the Supply List for beads and tools you can purchase.

You will also need:
Clock movement and battery
Small round mirror
Assorted multi-color adhesive gems
Craft glue

Step 2
Download the PDF for the Clock and Mirror Project Pattern. You will use the large hexagon, large circle, and large square pegboards for your projects. If you're using a clear pegboard, slide the actual-size pattern underneath it. Place all the beads for the design.

Step 3
Ask an adult to fuse your designs. Place your pegboard on a flat, heat-safe surface. Set a household iron to the medium setting. Place ironing paper over the pegboard. In a circular motion, begin to iron the project. When ironed properly, the beads will still have open centers. DO NOT OVER-IRON as this will cause the beads to close and can make assembly of your project more challenging. Let the design cool.

Step 4
Remove the paper and bead design from the pegboard. Flip the design over to expose the non-fused side. Repeat step two. Let cool completely. Once the design is cool, peel off the ironing paper. Your pegboards and ironing paper are reusable.

Note: Beads need heat for about 10-20 seconds per side to fuse evenly. Lift the paper occasionally to see how the beads are fusing. Additional heating time may be required.

Step 5
CLOCK ASSEMBLY: Insert the clock movement through the center opening in the clock face. Place the clock face into the feet as shown.

Step 6
MIRROR ASSEMBLY: Glue the small round mirror to the center of your bead circle. Randomly add adhesive gems as desired. Place the finished mirror into the feet as shown.