Step 1
Bead Colors Needed:
Light Pink - 9
Blush - 49
Hot Coral - 49
Raspberry - 84
Rust - 4
Brown - 103
Grey - 20
Black - 40
White - 44
Hot Coral Pearl Stripe - 18
See the Supply List for beads and tools you can purchase.

You will also need:
Lollipops

Step 2
Download the PDF for the Lollipop Lips Project Pattern. You will use the large square pegboard for your projects. If you are using a clear pegboard, slide the actual-size pattern underneath it. Place your beads on the pegboard as shown.

Step 3
Ask an adult to fuse your designs. Place your pegboard on a flat, heat-safe surface. Set a household iron to the medium setting. Place ironing paper over the pegboard. In a circular motion, begin to iron the project. When ironed properly, the beads will still have open centers. DO NOT OVER-IRON as this will cause the beads to close and can make assembly of your project more challenging. Let the design cool.

Step 4
Remove the paper and bead design from the pegboard. Flip the design over to expose the non-fused side. Repeat step two. Let cool completely. Once the design is cool, peel off the ironing paper. Your pegboards and ironing paper are reusable.

Note: Beads need heat for about 10-20 seconds per side to fuse evenly. Lift the paper occasionally to see how the beads are fusing. Additional heating time may be required.

Step 5
ASSEMBLY: Insert the lollipop stick through the center hole in the lips so the candy is on the back and the stick is to the front.