Step 1
Bead Colors Needed:
Peach - 357
Magenta - 56
Red - 190
Yellow - 39
Cheddar - 8
Kiwi Lime - 62
Light Blue - 4
Dark Blue - 24
Pastel Lavender - 50
Light Brown - 71
Grey - 1021 - 2 bags
Black - 1315 - 2 bags
White - 163
See the Supply List for beads and tools you can purchase.

Step 2
Download the PDF for the Perler Rocks Project Pattern. You will use the large square, large hexagon, large girl, and large boy pegboards for your project. For the speakers, you will assemble TWO large square pegboards as shown with the patterns. Cut out the individual halves of the chart and tape them together so that you can see the whole design at once. If you're using a clear pegboard, slide the actual-size pattern underneath it. Place all the beads for the design.

Step 3
Ask an adult to fuse your designs. Place your pegboard on a flat, heat-safe surface. Set a household iron to the medium setting. Place ironing paper over the pegboard. In a circular motion, begin to iron the project. When ironed properly, the beads will still have open centers. Let the design cool.

Step 4
Remove the paper and bead design from the pegboard. Flip the design over to expose the non-fused side. Repeat the fusing. Let cool completely. Once the design is cool, peel off the ironing paper. Your pegboards and ironing paper are reusable.

Note: Beads need heat for about 10-20 seconds per side to fuse evenly. Lift the paper occasionally to see how the beads are fusing. Additional heating time may be required.